Loudness Logging; Setting Up Moving Coils - DK-Technologies DK T7 User Manual

Loudness Logging

The DK T7 is capable of streaming its loudness data
to its companion PC application DKLogging, which is
available as a download free of charge for all DK
T7 and DK1, DK2, DK5 models from here:
http://www.dk-technologies.com/loudness-logging-
application/#downloads
The Loudness Logging data is captured through the
USB connection and allows for detailed review,
analysis and reporting of the different logged
parameters.
Also, the Logging application may started and
stopped automatically based timecode entries of
your choice.

Setting up Moving Coils

As mentioned earlier, DK T7 is capable of showing moving coil
instrument emulations as opposed to the default bargraphs.
Here is how to set it up:
- Once you have selected your sources and scale go to the
folder called 'Display Mode' (only visible with less than 4
input sources).
- Select 'Moving Coil' and you will instantly see number of
Moving coils corresponding to you input sources
- Tapping the Moving Coil Dual parameter will give you a
dual needle instrument instead.
- It is possible to disable the StarFish / Goniometer allowing
the Moving Coil display to fill the entire view. Here is how
to disable the StarFish:
- Slide to the first vertical button set and press [PHSE SRC].
- This shows the sources feeding the phase and Goniometer.
- Disable the source by tapping each one – Now the Gonio
meter and phase meter will disappear.
28 | P a g e