Label - Naming Your Input Source - DK-Technologies DK T7 User Manual

Source List
Group Source – Label
Internal Off
Internal TonL
Internal TonR
Internal Mix
Internal Diff
Internal Loud
Analogue e.g. L
Analogue e.g. R
AES Digital e.g. L, R, C, LFE, Ls, Rs
SDI De-embedded 1-16
2 - Label – Naming your input source
Any input source label may be altered within each preset.
The DK T7 includes a default list of typical names for faster naming, but you might
also define your own.
The Default Label list contains the following labels:
L CL
R CR
C CS
LFE DIFF
LS MIX
RS ML
Here is how to change a label to one of the default labels:
- Open the 'Source Selection' menu by tapping the specific source label that
you want to change.
- In the 'Source Select' menu, Press and hold the label you want to change,
for approximately 3 seconds and watch the 'Source Label Assign' menu
pop up
- Now scroll to and tap the desired label e.g. 'R'.
- Hit the left side of the Top Menu bar to Exit.
Creating your own Labels
12 | P a g e
# ID
1
3
4
5
6
7
33
34
35-42
129-144
MR
SMPT
AUX1
AUX2
1-8
-
Note
No input
Left output of the internal Tone
Generator
Right output of the internal Tone
Generator
Mono/Mix signal from the internal
Downmix function
Difference signal from the internal
Downmix function
Output from the internal Loudness
measurement module
Analogue input 1
Analogue input 2
AES input channels 1-8
SDI de-embedded channels 1-16
Touch the Top bar to access the Source
Selection Menu