DK-Technologies DK T7 User Manual page 14

INP
L
R
C
LFE
LS
As might notice, a lot of these types are identical to some of the Default Source labels mentioned in the Label
section above. If you have chosen one of these default labels, you can simply select the Type to be 'INP' for
'Input'. This means that that the DK T7 will look to the Input Source Label to learn what type of signal your
source is.
PLEASE NOTE: if the type is set to INP without having a relevant Source label selected, the Type will essentially
be ignored which could cause the source to not be routed to the appropriate instruments and measurements.
You can always manually select the specific Type that your source signal represents, in order to make sure that it
will routed correctly.
Hit the 'Bar Options' header on the left hand side to exit the menu.
14 | P a g e
RS
CL
CR
CS
LOUD
OFF