On-Screen' Button Sets Horizontal & Vertical - DK-Technologies DK T7 User Manual

'On-screen' Button sets
Horizontal & Vertical
The DK T7 features a set of eight buttons both horizontally and vertically.
In fact both the horizontal and vertical set of buttons feature no less than three sets of eight buttons, that may
be changed between by a simple 'swipe' across the button bar.
Every one of the buttons can be customized to perform exactly the function you require in a matter of seconds,
rendering an extremely powerful ability to restructure the user interface to your needs.
This may be used completely as you wish e.g. having a button strip with immediate access to the top 8 presets
of the DK T7, another with Loudness Start/Stop/Reset Functions and likely one to allow switching between the
different Metering Views; StarFish, Graphical LEQ, FFT and possibly a direct access to the internal Tone
Generator or something completely different.
In order to change specific button function, simply Press & Hold for approximately 3
seconds and you will see the function list pop up in the menu area.
Scroll and tap the function you want the current button to perform and Exit by hitting the
topbar on the left hand side – you are done.
TIP: The vertical and horizontal button strip last edited will automatically be called up as
the default strip after power up-
Here is the list of available button functions:
Function
None
[preset 1 name]
[preset 2 name]
[preset 3 name]
[preset 4 name]
[preset 5 name]
[preset 6 name]
[preset 7 name]
[preset 8 name]
[preset 9 name]
[preset 10 name]
[preset 11 name]
StarFish
Graph LEQ
24 | P a g e
Group Note
Preset Blank Button
Preset Recalls #
Preset
Preset Recalls #
Preset
Preset Recalls #
Preset
Preset Recalls #
Preset
Preset Recalls #
Preset
Preset Recalls #
Preset
Preset Recalls #
Preset
Preset Recalls #
Preset
Preset Recalls #
Preset
Preset Recalls #
Preset
Preset Recalls #
Preset
Application Selects StarFish
View
Application Selects Graph
LEQ View