Completing A Drying Cycle - Miele EVS 6114 Operating And Installation Instructions

Cleaning and care

Completing a drying cycle

When food is vacuumed, moisture gets
into the oil circulation system in the
vacuum pump. To remove the moisture,
it is necessary to run a drying cycle af-
ter a particular operating period.
The  sensor on the control panel of
the drawer lights up yellow when a dry-
ing cycle needs to be carried out. You
can still run another 10 vacuuming pro-
cesses after it lights up for the first time.
After that, the  sensor lights up red
and a drying cycle must be carried out.
The drawer will lock after the last re-
maining use and cannot be used again
until drying has been carried out.
We recommend carrying out a drying
cycle before the drawer locks out.
The whole drying cycle lasts for a maxi-
mum of 20 minutes.
28
When carrying out the drying cycle,
the vacuum chamber must be empty
and free from liquid residues.
Clean and dry the vacuum chamber
as necessary.
 Touch the  sensor.
 Close the glass lid.
The drying cycle starts. The  sensor
will flash yellow throughout the entire
process.
You can cancel the drying cycle with
the  sensor. If a drying cycle is
canceled, it must be repeated after the
remaining vacuuming processes have
elapsed or when the drawer is
switched on again.
When the drying cycle has finished, a
buzzer will sound and the  sensor
goes out. You can now use the drawer
again as usual.