Samsung FlexWash WV16M9945K Series User Manual page 73

Code
Upper Lower
washer washer
1 LC
1 LC1 LC1
1 4C
1 4C2 4C2
FlexWash_DC68-03768L-00_EN.indd 73
Check for water leaks.
• Power the washer off, and then check the drain system for
any leaks. Once the leak issue is resolved, power the washer
on after 2-3 minutes.
LC
• Depending on the model, the drain system drains water
automatically. The POWER and START/PAUSE buttons may
be disabled during this process.
Check the drain hose.
• Make sure the end of the drain hose is placed on the floor.
• Make sure the drain hose is not clogged.
• If the information code remains, contact a customer service
centre.
Others
• Use caution not to overfill any of the compartments (main
wash/fabric softener).
• Do not spray or use water when cleaning the top door of the
upper washer. Use a cloth to wipe up.
Check the water supply line.
• Check the connection to the water line (including water
taps).
• Power off and then power the washer on after 2-3 minutes,
4C
and then try again.
• Depending on the model, the drain system drains water
automatically. The POWER and START/PAUSE buttons may
be disabled during this process.
The water being supplied is too hot.
• Make sure the cold and hot water taps are properly
connected.
• Power off and then power the washer on after 2-3 minutes,
and then try again.
Action
English 73
2017-09-13 2:26:21