Samsung FlexWash WV16M9945K Series User Manual page 22

Installation
STEP 3 Adjust the levelling legs
STEP 4 Connect the water hoses
The provided hose adaptor may differ with the model. This step guides you through
connecting the connector-type adaptor. If you are provided with the screw-type adaptor,
go to 7.
22 English
FlexWash_DC68-03768L-00_EN.indd 22
1. Gently slide the washer into position.
Excessive force may damage the
levelling legs.
2. Level the washer by manually adjusting
the levelling legs.
3. When levelling is complete, tighten the
nuts using the wrench.
NOTE
An adjustable wrench or 17 mm open-
end wrench is required to loosen or
tighten the leveling legs.
Connect the water hose to the water tap.
1. Remove the adaptor (A) from the water
hose (B).
A
B
2. Use a Phillips screwdriver to loosen
four screws on the adaptor.
2017-09-13 2:26:09