Samsung FlexWash WV16M9945K Series User Manual page 27

The pipe connector can be positioned in the following ways:
B
B
FlexWash_DC68-03768L-00_EN.indd 27
Over the edge of a wash basin
The pipe connector (B) must be placed at a
height of between 60 cm and 90 cm from
the floor. To keep the spout of the drain
hose bent, use the supplied plastic hose
A
guide (A). Secure the guide to the wall
using a hook to ensure stable drainage.
B : Pipe Connector
ln a standpipe or laundry tub
The laundry tub (B) or standpipe (C) must
A
be no shorter than 46 cm and no higher
F
or longer than 245 cm. Make sure the
G
E
pipe connector and the standpipe are
D
not airtight. The height of the standpipe
(E) must be 1100 mm or higher from the
floor.
C
A: Hose guide / D: Tie straps / F : Pipe
Connector / G: 85 mm
• Do not extend the (Y-shaped) pipe
• Make sure you face the tip of the pipe
NOTE
NOTE
CAUTION
connector using an extension hose.
connector downwards to the drain hole.
Positioning the connector tip elsewhere
can cause the drained water to flow
backward.
English 27
2017-09-13 2:26:12