How To Use The Buttons; Auto Operation; Dehumidifying Operation; Cooling/Heating/Fan Operation - Nobu NBO3-09IDU User Manual

How to use the buttons

2
3
ON/OFF
SHORT
CUT
1
TIMER
MODE
ON
TEMP
TIMER
FAN
OFF
SLEEP SWING DIRECT
TURBO LED
2
4
ON/OFF
SHORT
CUT
1
TIMER
MODE
ON
TEMP
3
TIMER
FAN
OFF
SLEEP SWING DIRECT
TURBO
LED

Auto operation

Ensure the unit is plugged in and power is
available. The OPERATION indicator on the
display panel of the indoor unit starts flashing.
1. Press the MODE button to select Auto.
2. Press the UP/DOWN button to set the
desired temperature. The temperature can
be set within a range of 17 C~ 30 C in 1 C O O
increments.
3. Press the ON/OFFbutton to start the air
conditioner.
NOTE
1. In the Auto mode, the air conditioner can logically
choose the mode of Cooling, Fan, and Heating
by sensing the difference between the actual
ambient room temperature and the setting
temperature on the remote controller.
2. In the Auto mode, you can not switch the fan speed.
It has already been automatically controlled.
3. If the Auto mode is not comfortable for you , the
desired mode can be selected manually.
Cooling /Heating/Fan operation
Ensure the unit is plugged in and power is
available.
1. Press the MODE button to select COOL,
HEAT(cooling & heating models only) or
FAN mode.
2. Press the UP/DOWN buttons to set the
desired temperature. The temperature can
be set within a range of 17 C~ 30 C in 1 C O O
increments.
3. Press the FAN button to select the fan speed
in four steps- Auto, Low, Med,or High.
4. Press the ON/OFF button to start the air
conditioner.
NOTE
In the FAN mode, the setting temperature is not
displayed in the remote controller and you are not
able to control the room temperature either. In this
case, only step 1, 3 and 4 may be performed.
7
7
How to use the buttons
O
3
ON/OFF
1
MODE
TEMP
FAN
SLEEP SWING DIRECT
TURBO
O

Dehumidifying operation

Ensure the unit is plugged in and power is
available. The OPERATION indicator on the
display panel of the indoor unit starts flashing.
1. Press the MODE button to select DRY mode.
2. Press the UP/DOWN buttons to set the
desired temperature.
can be set within a range of 17 C~ 30 C
in 1 C increments. O
3. Press the ON/OFF button to start the air
conditioner.
2
NOTE
SHORT In the Dehumidifying mode, you can not switch the
CUT
fan speed. It has already been automatically controlled.
TIMER
ON
TIMER
OFF
LED
8
The temperature
O O