Operation Of Buttons - Nobu NBO3-09IDU User Manual

Operation of buttons

8
1 9
ON/OFF
SHORT
CUT
10
2
TIMER
MODE
ON
TEMP
11
3
TIMER
FAN
OFF
4 12
SWING DIRECT
SLEEP
LED
TURBO
6
14
RG57B/BGE
ON/OFF Button
1
This button turns the air conditioner ON
and OFF.
MODE Button
2
Press this button to modify the air conditioner
mode in a sequence of following:
HEAT
AUTO COOL DRY
NOTE Please do not select HEAT mode if the
machine you purchased is cooling only type.
Heat mode is not supported by the cooling only
appliance.
3 FAN Button
Used to select the fan speed in four steps:
AUTO LOW MED HIGH
NOTE: You can not switch the fan speed in
AUTO or DRY mode.
4
SLEEP Button
Active/Disable sleep function. It can
maintain the most comfortable temperature
and save energy. This function is available
on COOL, HEAT or AUTO mode only .
, , ,,
For the detail, see sleep operation in
,
,,
, ,
USER S MANUAL.
NOTE: While the unit is running under SLEEP
mode, it would be cancelled if MODE, FAN
SPEED or ON/OFF button is pressed.
6
TURBO Button
Active/Disable Turbo function. Turbo function
enables the unit to reach the preset temper-
ature at cooling or heating operation in the
shortest time(if the indoor unit does not support
this function, there is no corresponding
operation happened when pressing this button.)
3
Operation of buttons
FAN
1
ON/OFF
2
MODE
TEMP
3
FAN
4
SWING DIRECT
SLEEP
TURBO
6
RG57B/BGE
8
UP Button(
Push this button to increase the indoor
temperature setting in 1 C increments to 30 C.
DOWN Button(
Push this button to decrease the indoor
temperature setting in 1 C increments to 17 C.
NOTE Temperature contol is not available
in Fan mode.
9
SHORTCUT Button
Used to restore the current settings or
8
resume previous settings.
On the first time connecting to the power,
9
if push the SHORTCUT button, the unit
SHORT
CUT
will operate on AUTO mode, 26 C, and fan
speed is Auto.
10
TIMER
Push this button when remote controller is
ON
on, the system will automatically revert
11
TIMER
back to the previous settings including
OFF
operating mode, setting temperature, fan
12
speed level and sleep feature(if activated).
If pushing more than 2 seconds, the system
LED will automatically restore the current
operation settings including operating mode,
14
setting temperature, fan speed level and
sleep feature(if activated ).
10
TIMER ON Button
Press this button to initiate the auto-on
time sequence. Each press will increase
the auto-timed setting in 30 minutes
increments. When the setting time displays
10.0, each press will increase the auto-
timed setting 60 minutes increments.
To cancel the auto-timed program, simply
adjust the auto-on time to 0.0.
11
TIMER OFF Button
Press this button to initiate the auto-off time
sequence. Each press will increase the auto
-timed setting in 30 minutes increments.
When the setting time displays 10.0, each
press will increase the auto-timed setting
60 minutes increments. To cancel the auto-
timed program, simply adjust the auto-off
time to 0.0
4
)
o o
)
o o
O