Attaching The Monitor Stand - HP OMEN 25 User Manual

Attaching the monitor stand

CAUTION: The screen is fragile. Avoid touching or applying pressure to the screen; doing so can cause
damage.
TIP: Consider the placement of the display, because the bezel might cause interfering reflections from
surrounding light and bright surfaces.
1. Lift the monitor from its box and place it facedown on a flat surface covered by a clean, dry cloth.
2. Remove the base and neck of the stand from the box.
3. Press the cable management feature (1) into place on the neck.
4. To assemble the base and neck, align the base with the neck (2), insert the thumbscrew on the base into
the neck, and tighten the thumbscrew (3) securely.
5. Attach the stand to the monitor by pressing the bracket (4) at the top of the stand onto the connector on
the back of the display head until the bracket clicks securely into place.
Setting up the monitor 5