Download Print this page
HP OMEN 25 Disassembly Instructions

HP OMEN 25 Disassembly Instructions

25 24.5-in display
Hide thumbs Also See for OMEN 25:

Advertisement

Quick Links

Product End-of-Life Disassembly Instructions
Product Category: Monitors and Displays
Marketing Name / Model
[List multiple models if applicable.]
OMEN by HP 25 24.5-in Display
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions
for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU
directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
1.0 Items Requiring Selective Treatment
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as
applicable.
Item Description
Printed Circuit Boards (PCB) or Printed Circuit
Assemblies (PCA)
Batteries
Mercury-containing components
Liquid Crystal Displays (LCD) with a surface greater
than 100 sq cm
Cathode Ray Tubes (CRT)
Capacitors / condensers (Containing PCB/PCT)
Electrolytic Capacitors / Condensers measuring
greater than 2.5 cm in diameter or height
External electrical cables and cords
Gas Discharge Lamps
Plastics containing Brominated Flame Retardants
weighing > 25 grams (not including PCBs or PCAs
already listed as a separate item above)
Components and parts containing toner and ink,
including liquids, semi-liquids (gel/paste) and toner
Components and waste containing asbestos
Components, parts and materials containing
EL-MF877-00
Template Revision B
Notes
With a surface greater than 10 sq cm
Main Board, Keypad
All types including standard alkaline and lithium coin
or button style batteries
For example, mercury in lamps, display backlights,
scanner lamps, switches, batteries
Includes background illuminated displays with gas
discharge lamps
Include the cartridges, print heads, tubes, vent
chambers, and service stations. Bezel,Back
cover,Stand base cover,stand earphone hook
PSG instructions for this template are available at
EL-MF877-01
Quantity
of items
included
in product
2
N/A
N/A
1
N/A
4
Page 1

Advertisement

loading

Summary of Contents for HP OMEN 25

  • Page 1 Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
  • Page 2 refractory ceramic fibers Components, parts and materials containing radioactive substances 2.0 Tools Required List the type and size of the tools that would typically be used to disassemble the product to a point where components and materials requiring selective treatment can be removed. Tool Description Tool Size (if applicable)
  • Page 3 Use hand Disassembly Tool (Better) and a tool to separate back cover assy from monitor as below picture, but pay attention to avoid the LVDS cable and Lightbar cable Use hand take out the cable manageme nt and unlock the screw Fixed base and arm...
  • Page 4 Unlock 2 Ph0 Cross Screwdriver screws fixed Keypad Bucket then the keypad is separated. Ph2 Cross Pull out all Screwdriver cables except the LVDS and unlock 4 screws fixed Main board and chassis then separate Mainboard Unlock 4 Ph2 Cross Screwdriver screws fixed the...