United States and/or other countries. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty.
About This Guide This guide provides information on monitor features, setting up the monitor, using the software and technical specifications. WARNING! Text set off in this manner indicates that failure to follow directions could result in bodily harm or loss of life. CAUTION: Text set off in this manner indicates that failure to follow directions could result in damage to equipment or loss of information.
Table of contents 1 Getting Started ............................. 1 Important safety information ..........................1 Product features and components ........................2 Features ............................... 2 Side and bottom components on the rear panel ................3 Stand components ..........................4 Setting up the monitor ............................4 Use caution when setting up the monitor ...................
Button lockouts ..............................18 Product support ..............................19 Preparing to call technical support ........................19 Locating the rating label ............................19 4 Maintaining the monitor ..........................20 Maintenance guidelines ............................20 Cleaning the monitor ......................... 20 Shipping the monitor ......................... 20 Appendix A Technical specifications .........................
Use a power strip whose manufacturer offers a damage replacement policy so you can replace the equipment, if surge protection fails. Use the appropriate and correctly sized furniture designed to properly support your HP LCD monitor. WARNING! LCD monitors that are inappropriately situated on dressers, bookcases, shelves, desks, speakers, chests, or carts may fall over and cause personal injury.
NOTE: For safety and regulatory information, refer to the Product Notices provided in your documentation kit. To locate updates to the user guide for your product, go to http://www.hp.com/support. Select Find your product, and then follow the on-screen instructions. Chapter 1 Getting Started...
Side and bottom components on the rear panel Item Component Function Power button When the monitor is off, press the button to turn on the monitor. button Press to open the OSD menu, select a menu item from the OSD, or close the OSD menu. An indicator is activated above the button when the OSD menu is open.
Stand components Item Component Stand release button Headphone storage hook Cable management Setting up the monitor Use caution when setting up the monitor To prevent damage to the monitor, do not touch the surface of the LCD panel. Pressure on the panel may cause non-uniformity of color or disorientation of the liquid crystals.
Attaching the monitor stand CAUTION: The screen is fragile. Avoid touching or applying pressure to the screen; doing so can cause damage. TIP: Consider the placement of the display, because the bezel might cause interfering reflections from surrounding light and bright surfaces. Lift the monitor from its box and place it facedown on a flat surface covered by a clean, dry cloth.
Mounting the display head You can remove the display head from the stand to install the display head on a wall, a swing arm, or other mounting fixture. NOTE: This apparatus is intended to be supported by a UL- or CSA-Listed wall mount bracket. CAUTION: This monitor supports the VESA industry-standard 100 mm mounting holes.
Attaching the VESA mounting bracket A VESA mounting bracket is included with the monitor for use when attaching the display head to a wall, swing arm, or other mounting fixture. Remove the monitor stand. Refer to Removing the monitor stand on page Press the connector on the VESA bracket onto the connector on the back of the display head until the bracket clicks into place.
Connecting the cables NOTE: The monitor ships with select cables. Not all cables shown in this section are included with the monitor. Place the monitor in a convenient, well-ventilated location near the computer. Connect a video cable. NOTE: The monitor will automatically determine which inputs have valid video signals. The inputs can be selected through the on-screen display by pressing the Menu button and selecting Input Control.
Connect the Type-B connector of a USB upstream cable to the USB upstream port on the rear of the monitor. Then connect the cable’s Type-A connector to a USB downstream port on the source device. Connect one end of the power cord to the AC adapter (1) and the other end to a grounded electrical outlet (2), and then connect the AC adapter to the monitor (3).
Connecting USB devices There are two USB downstream ports and one USB upstream port on the rear of the monitor. NOTE: You must connect the USB upstream cable from the source computer to the monitor to enable the USB ports on the monitor. Refer to Step 3 in Connecting the cables on page Adjusting the monitor Tilt the monitor panel forward or backward to set it to a comfortable eye level.
Installing a security cable A security cable is a key lock device that has a wire cable attached. You attach one end of the cable to your desk (or other stationary object) and the other end of the cable to the security cable slot on the computer. Secure the security cable lock with the key.
Software and utilities The optical disc, if one is included with the monitor, contains files that you can install on the computer. If you do not have an optical drive, you can download the files from http://www.hp.com/support. INF (Information) file ●...
Using the software To use the My Display software, select the HP My Display icon on the taskbar and refer to the software Help. Using the on-screen display (OSD) menu Use the on-screen display (OSD) to adjust the screen image based on your viewing preferences. You can access and make adjustments in the OSD using the buttons on the right side of the display or the buttons on the remote control.
The default response time for the monitor is 7 ms. The response time can be adjusted to as little as 1 ms in the display menu. All performance specifications represent the typical specifications provided by HP’s component manufacturers; actual performance may vary either higher or lower. Using the on-screen display (OSD) menu...
Assigning the Function buttons Pressing one of the three front Function buttons activates the buttons and displays the icons above the buttons. The factory default button icons and functions are shown below. Button Function Opens the OSD (on-screen display) menu. Information Opens the Information menu.
It describes proper workstation setup, posture, health, and work habits for computer users. The Safety & Comfort Guide also provides important electrical and mechanical safety information. The Safety & Comfort Guide is also available on the web at http://www.hp.com/ergo. Using Auto-Sleep Mode The display supports an OSD option called Auto-Sleep Mode that allows you to enable or disable a reduced power state for the display.
Support and troubleshooting Solving common problems The following table lists possible problems, the possible cause of each problem, and the recommended solutions. Problem Possible Cause Solution Screen is blank or video is Power cord is disconnected. Connect the power cord. flashing.
Locating the rating label The rating label on the monitor provides the product number and serial number. You may need these numbers when contacting HP about the monitor model. The rating label is located on the bottom of the display head.
If the monitor is not operating properly or has been dropped or damaged, contact an authorized HP dealer, reseller, or service provider. Use only a power source and connection appropriate for this monitor, as indicated on the label/back ●...
Technical specifications NOTE: All specifications represent the typical specifications provided by HP's component manufacturers; actual performance may vary either higher or lower. For the latest specifications or additional specifications on this product, go to http://www.hp.com/go/ quickspecs/ and search for your specific display model to find the model-specific QuickSpecs.
Specification Measurement Storage 0 m to 12,192 m 0 ft to 40,000 ft Power source 100 V ac to 240 V ac 50/60 Hz Measured power consumption 40 W Full power 30 W Typical settings <0.5 W Sleep <0.3 W Input terminal Two HDMI connectors, one DisplayPort connector Preset display resolutions...
Preset Timing name Pixel format Horz freq (kHz) Vert freq (Hz) 1080p60 1920 × 1080 67.5 1080p50 1920 × 1080 56.25 Entering user modes The video controller signal may occasionally call for a mode that is not preset if: You are not using a standard graphics adapter. ●...
Accessibility HP designs, produces, and markets products and services that can be used by everyone, including people with disabilities, either on a stand-alone basis or with appropriate assistive devices. Supported assistive technologies HP products support a wide variety of operating system assistive technologies and can be configured to work with additional assistive technologies.