Download Print this page
HP OMEN 27 Disassembly Instructions Manual

HP OMEN 27 Disassembly Instructions Manual

27 27-in display
Hide thumbs Also See for OMEN 27:

Advertisement

Quick Links

Product End-of-Life Disassembly Instructions

Product Category: Monitors and Displays
Marketing Name / Model
[List multiple models if applicable.]
OMEN by HP 27 27-in Display
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions
for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU
directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
1.0 Items Requiring Selective Treatment
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as
applicable.
Item Description
Printed Circuit Boards (PCB) or Printed Circuit
Assemblies (PCA)
Batteries
Mercury-containing components
Liquid Crystal Displays (LCD) with a surface greater
than 100 sq cm
Cathode Ray Tubes (CRT)
Capacitors / condensers (Containing PCB/PCT)
Electrolytic Capacitors / Condensers measuring
greater than 2.5 cm in diameter or height
External electrical cables and cords
Gas Discharge Lamps
Plastics containing Brominated Flame Retardants
weighing > 25 grams (not including PCBs or PCAs
already listed as a separate item above)
Components and parts containing toner and ink,
including liquids, semi-liquids (gel/paste) and toner
EL-MF877-00
Template Revision B
Notes
With a surface greater than 10 sq cm
I/F Board*1, Control Board*1, Audio Board*1, LED
Board*1, LED Driver Board*1, G-sync Board*1
All types including standard alkaline and lithium coin
or button style batteries
For example, mercury in lamps, display backlights,
scanner lamps, switches, batteries
Includes background illuminated displays with gas
discharge lamps panel*1
In adapter (C1)
DP cable*1, USB3.0 cable*1, Power cord*1,
Adapter*1
All are inside monitor carton box
Include the cartridges, print heads, tubes, vent
chambers, and service stations.
PSG instructions for this template are available at
EL-MF877-01
Quantity
of items
included
in product
6
0
0
1
0
0
1
4
0
0
0
Page 1

Advertisement

loading

Summary of Contents for HP OMEN 27

  • Page 1 Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
  • Page 2 Components and waste containing asbestos Components, parts and materials containing refractory ceramic fibers Components, parts and materials containing radioactive substances 2.0 Tools Required List the type and size of the tools that would typically be used to disassemble the product to a point where components and materials requiring selective treatment can be removed.
  • Page 3 Step 1 :Use quick release button to separate head and stand. EL-MF877-00 Page 3 Template Revision B PSG instructions for this template are available at EL-MF877-01...
  • Page 4 Step 2 : Use tool to release the two screws and disassemble the rear cover by tool. EL-MF877-00 Page 4 Template Revision B PSG instructions for this template are available at EL-MF877-01...
  • Page 5 Step 3 : Remove the tape and disassemble the wire. Step 4 : Remove the conductive tape and the screw at the hinge. EL-MF877-00 Page 5 Template Revision B PSG instructions for this template are available at EL-MF877-01...
  • Page 6 Step 5 : Remove the yellow tape and disassemble the backlight wire, four LVDS FFC and ambient light board. EL-MF877-00 Page 6 Template Revision B PSG instructions for this template are available at EL-MF877-01...
  • Page 7 Step 6 : Separate LVDS FFC and ambient light FFC, remove the AL-mylar, release the screw on PCBs, tear the gaskets, thermal pad and mylar. EL-MF877-00 Page 7 Template Revision B PSG instructions for this template are available at EL-MF877-01...
  • Page 8 EL-MF877-00 Page 8 Template Revision B PSG instructions for this template are available at EL-MF877-01...
  • Page 9 EL-MF877-00 Page 9 Template Revision B PSG instructions for this template are available at EL-MF877-01...
  • Page 10 Step 7 Release the screw on mid-frame to remove the deco and panel. EL-MF877-00 Page 10 Template Revision B PSG instructions for this template are available at EL-MF877-01...
  • Page 11 Step 8: Remove the tape and release the screw on rear-cover to remove the ctrl board and audio board, disassemble the RC lens. EL-MF877-00 Page 11 Template Revision B PSG instructions for this template are available at EL-MF877-01...
  • Page 12 EL-MF877-00 Page 12 Template Revision B PSG instructions for this template are available at EL-MF877-01...
  • Page 13 Step 9: Remove two parts LOGO on the rear cover. EL-MF877-00 Page 13 Template Revision B PSG instructions for this template are available at EL-MF877-01...
  • Page 14 Step 10: Remove the lens on the deco and tear the mylar. Step 11: Remove the screws form column, and separate plastic part. EL-MF877-00 Page 14 Template Revision B PSG instructions for this template are available at EL-MF877-01...
  • Page 15 Step 12: Remove cable clip EL-MF877-00 Page 15 Template Revision B PSG instructions for this template are available at EL-MF877-01...
  • Page 16 Step 13: Remove the screw from hook, and remove hook EL-MF877-00 Page 16 Template Revision B PSG instructions for this template are available at EL-MF877-01...
  • Page 17 Step 14: Remove the screw from BKT, and remove life module, and disassemble lift module EL-MF877-00 Page 17 Template Revision B PSG instructions for this template are available at EL-MF877-01...
  • Page 18 Step 15: Remove the rubber from base EL-MF877-00 Page 18 Template Revision B PSG instructions for this template are available at EL-MF877-01...
  • Page 19 EL-MF877-00 Page 19 Template Revision B PSG instructions for this template are available at EL-MF877-01...