Download  Print this page

HP OMEN X Disassembly Instructions Manual

35-inch curved display.
Hide thumbs
   

Advertisement

Product End-of-Life Disassembly Instructions
Product Category: Monitors and Displays
Marketing Name / Model
[List multiple models if applicable.]
OMEN X by HP 35-inch Curved Display
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions
for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU
directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
1.0 Items Requiring Selective Treatment
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as
applicable.
Item Description
Printed Circuit Boards (PCB) or Printed Circuit
Assemblies (PCA)
Batteries
Mercury-containing components
Liquid Crystal Displays (LCD) with a surface greater
than 100 sq cm
Cathode Ray Tubes (CRT)
Capacitors / condensers (Containing PCB/PCT)
Electrolytic Capacitors / Condensers measuring
greater than 2.5 cm in diameter or height
External electrical cables and cords
Gas Discharge Lamps
Plastics containing Brominated Flame Retardants
weighing > 25 grams (not including PCBs or PCAs
already listed as a separate item above)
Components and parts containing toner and ink,
including liquids, semi-liquids (gel/paste) and toner
Components and waste containing asbestos
Components, parts and materials containing
refractory ceramic fibers
Components, parts and materials containing
radioactive substances
Notes
With a surface greater than 10 sq cm
All types including standard alkaline and lithium coin
or button style batteries
For example, mercury in lamps, display backlights,
scanner lamps, switches, batteries
Includes background illuminated displays with gas
discharge lamps
Include the cartridges, print heads, tubes, vent
chambers, and service stations.
Quantity
of items
included
in product
4
0
0
1
0
22
0
4
0
0
0
0
0
0

Advertisement

Table of Contents

   Also See for HP OMEN X

   Related Manuals for HP OMEN X

   Summary of Contents for HP OMEN X

  • Page 1 Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
  • Page 2 2.0 Tools Required List the type and size of the tools that would typically be used to disassemble the product to a point where components and materials requiring selective treatment can be removed. Tool Description Tool Size (if applicable) Description #1 Screw driver of "+" type Description #2 Hexagonal nut screw driver for DVI and D-SUB connector Description #3 Description #4...
  • Page 3: Mechanical Instructions

    11. Mechanical Instructions Step Figure Description The model using the curved surface screen; There must be put soft mat above of the work Remove station and don't the Stand push hard on the -Base machine to avoid ASSY. cause screen to crack.
  • Page 4 Remove Remove the screws the screws to remove the hinge to remove the hinge Remove Remove the pin and the Pin and tapes. tapes...
  • Page 5 Remove Remove the screws to remove the Ambient Ambient Light board Light board and remove the and the tapes tapes Remove Remove the pins and the pins the screw and the screw...
  • Page 6 Remove the screws Remove the screws to remove to remove the DECO the DECO & Middle frame & Middle frame Remove Remove the pin the pin...
  • Page 7 The panel The panel Take off the mylar Remove and remove the the board screws.
  • Page 8 The pins Take off the pins Remove the shield Remove the shield...
  • Page 9 Remove the key The Rear board and the cover headphone jack board...

Comments to this Manuals

Symbols: 0
Latest comments: