Zanussi ZFU25201WA User Manual page 9

What to do if...
Problem
The appliance does not operate.
The Alarm light flashes
The appliance is noisy.
Power indicator light is flashing.
The compressor operates contin-
ually.
There is too much frost and ice.
The compressor does not start
immediately after pressing the
QuickFreeze, or after changing
the temperature.
www.zanussi.com
Possible cause
The appliance is switched off.
The mains plug is not connec-
ted to the mains socket cor-
rectly.
There is no voltage in the
mains socket.
The temperature in the freezer
is too high.
The appliance is not supported
properly.
An error has occurred in meas-
uring the temperature.
The appliance is not working
properly.
Temperature is set incorrectly.
Many food products were put
in at the same time.
The room temperature is too
high.
Food products placed in the
appliance were too warm.
The door is not closed correct-
ly.
The QuickFreeze function is
switched on.
The door is not closed correct-
ly or the gasket is deformed/
dirty.
This is normal, no error has oc-
curred.
Solution
Switch on the appliance.
Connect the mains plug to the
mains socket correctly.
Connect a different electrical appli-
ance to the mains socket. Contact
a qualified electrician.
Refer to 'High Temperature Alarm.
Check if the appliance stands sta-
ble.
Contact a qualified electrician or
contact the nearest Authorised
Service Centre.
Contact a qualified electrician or
contact the nearest Authorised
Service Centre.
Refer to "Operation" chapter.
Wait some hours and then check
the temperature again.
Refer to climate class chart on the
rating plate.
Allow food products to cool to
room temperature before storing.
Refer to "Closing the door".
Refer to "QuickFreeze function".
Refer to "Closing the door".
The compressor starts after a peri-
od of time.
9