Technical Information - Zanussi ZFU25201WA User Manual

3
2
1
5. Remove the door.
6. Position the pin and the washers on the
opposite side (4).
5
4
6
7. Unscrew the upper pin (1) and place it on
the opposite side (2).
2
1
8. Refit the door.
9. Refit the plinth.
10. Stand the appliance upright.
11. Unscrew the handle (1) and fix it on the
opposite side (2).

Technical information

Technical data
Height
Width
Depth
Rising time
Voltage
Frequency
www.zanussi.com
1
2
12. Re-insert the cover pins (3) on the opposite
side.
CAUTION!
Reposition, level the appliance, wait
for at least four hours and then
connect it to the power socket.
Do a final check to make sure that:
• All screws are tightened.
• The magnetic seal adheres to the
cabinet.
• The door opens and closes
correctly.
If the ambient temperature is cold
(i.e. in Winter), the gasket may not fit
perfectly to the cabinet. In that case,
wait for the natural fitting of the
gasket.
In case you do not want to carry out
the above mentioned operations,
contact the nearest Authorised
Service Centre. The Authorised
Service specialist will carry out the
reversibility of the doors at your cost.
mm
mm
mm
Hours
Volts
Hz
3
1850
595
668
15
230 - 240
50
13