Introduction - Aurora THE AETHER Installation And User Manual

1
planning

INTRODUCTION

For your safety, ensure you have read
the operation guidelines prior to use.
Your fire should be installed by a qualified
professional. Refer to our website for
assistance finding an installer in your area:
www.aurorasuspendedfires.com/support/
find-installer/
INSTALATION PROCESS
1. Choose the position of firebox and
flue ensuring that you follow the
clearances described within this
section
2. Install the suspension bracket
3. Install the internal flue
4. Install the flue adaptor
5. Install the external flue & anti-
down draught cowl
6. Engage the firebox
7. Ensure the floor has adequate
protection
! Mixing of appliance or flue-system
components from different sources or
modifying the dimensional specification
of components may result in hazardous
conditions. Where such action is
considered, Aurora fires should be
consulted in the first instance.
04
installation and user manual
wARNING
·
The appliance and flue system shall
be installed in accordance with AS/
NZS 2918 and the appropriate
requirements of the relevant
building code or codes.
·
Appliances installed in accordance
with this standard shall comply
with the requirements of AS/
NZS 4013 where required by
the regulatory authority, i.e. The
appliance shall be identifiable by a
compliance plate with the marking
'tested to AS/NZS 4013' .
· Any modification of the appliance
that has not been approved in
writing by the testing authority is
considered to be in breach of the
Approval granted for compliance
with AS/NZS 4013.