Aurora THE AETHER Installation And User Manual
Hide thumbs
Also See for THE AETHER:
- Installation and user manual (22 pages) ,
- Installation and user manual (49 pages) ,
- Installation and user manual (25 pages)
Subscribe to Our Youtube Channel
Related Manuals for Aurora THE AETHER
Summary of Contents for Aurora THE AETHER
- Page 1 THE AETHER INSTALLATION AND USER MANUAL AURORA FIRES INSTALLATION AND USER MANUAL +61 (0) 266 868 408 PO 347 BOX BYRON BAY NSW 2481...
- Page 2 CONTENTS PLANNING DIMENSIONS & SPECIFICATIONS INSTALLATION OPERATION USE & INITIAL START UP CLEANING & CARE TESTING KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE AURORA FIRES INSTALLATION AND USER MANUAL +61 (0) 266 868 408 PO 347 BOX BYRON BAY NSW 2481...
- Page 3 1. PLANNING We would like to thank you for your purchase of The Aether.The care and craftsmanship we put into each fire will give you trouble free heating for many years to come. For your safety, ensure you have read the operation guidelines prior to use. The Aether should be installed by a qualified professional.
- Page 4 Frames must also be considered. Timber window frames must be treated as combustible surfaces. Aluminium frames can be treated as non- combustible surfaces AURORA FIRES INSTALLATION AND USER MANUAL +61 (0) 266 868 408 PO 347 BOX BYRON BAY NSW 2481...
- Page 5 Resistant to 650 degrees MATTE BLACK A range of other colours are available on request. For more information visit our website. AURORA FIRES INSTALLATION AND USER MANUAL +61 (0) 266 868 408 PO 347 BOX BYRON BAY NSW 2481...
- Page 6 • 12mm ventilation gap between the plasterboard and the ceiling flange • 25mm minimum clearance from the triple skin flue to any combustible material within the roof space AURORA FIRES INSTALLATION AND USER MANUAL +61 (0) 266 868 408 PO 347 BOX BYRON BAY NSW 2481...
- Page 7 3. INSTALLATION (CONTINUED) PITCHED ROOF INSTALLATION (Custom Made Bracket) NOTE: Ceramic spacers & insulate tape to be provided by installer. AURORA FIRES INSTALLATION AND USER MANUAL +61 (0) 266 868 408 PO 347 BOX BYRON BAY NSW 2481...
- Page 8 The minimum height of the flue system further than 3 meters from the highest point of the roof shall be 1 meter above roof penetration. AURORA FIRES INSTALLATION AND USER MANUAL +61 (0) 266 868 408 PO 347 BOX BYRON BAY NSW 2481...
- Page 9 The minimum height of the flue system further than 3 meters from 1 meter the highest point of the roof shall be 1 meter above roof penetration. AURORA FIRES INSTALLATION AND USER MANUAL +61 (0) 266 868 408 PO 347 BOX BYRON BAY NSW 2481...
- Page 10 • PLEASE REFER TO 3.4 FOR A STEP BY STEP GUIDE TO INSTALLING FIRST LENGTH OF 6 INCH FLUE. Dropbox AURORA FIRES INSTALLATION AND USER MANUAL +61 (0) 266 868 408 PO 347 BOX BYRON BAY NSW 2481...
- Page 11 flue as far as it will go until it bottoms out. resulting in a weak draw on the fire. AURORA FIRES INSTALLATION AND USER MANUAL +61 (0) 266 868 408 PO 347 BOX BYRON BAY NSW 2481...
- Page 12 Pivot Lower plate Stainless Thrust Bearing Ball Bearing Cap NOTE: The bearings are 16mm Nut shipped in the correct order on the shaft. AURORA FIRES INSTALLATION AND USER MANUAL +61 (0) 266 868 408 PO 347 BOX BYRON BAY NSW 2481...
- Page 13 • If the combustible floor is installed on concrete, you can replace the combustible material with a non-combustible material laid directly onto the concrete. • See over page for height specifications. AURORA FIRES INSTALLATION AND USER MANUAL +61 (0) 266 868 408 PO 347 BOX BYRON BAY NSW 2481...
- Page 14 Note: Non combustible finishes can be applied to the floor protector, e.g. tiles, stone, metal. Floor protector 30cm 30cm 650mm Floor AURORA FIRES INSTALLATION AND USER MANUAL +61 (0) 266 868 408 PO 347 BOX BYRON BAY NSW 2481...
- Page 15 • THE USE OF SOME TYPES OF PRESERVATIVE-TREATED WOOD AS A FUEL CAN BE HAZARDOUS. • DO NOT TOUCH THE FIREBOX OR FLUE WHEN HOT. AURORA FIRES INSTALLATION AND USER MANUAL +61 (0) 266 868 408 PO 347 BOX BYRON BAY...
- Page 16 fireplace. Once this initial firing process is successfully completed, the coating will bond to the metal with a colourfast finish that will last for years AURORA FIRES INSTALLATION AND USER MANUAL +61 (0) 266 868 408 PO 347 BOX BYRON BAY NSW 2481...
- Page 17 Repeat this process twice. Once these burns are complete there will be no odour or smoke the next time the stove is fired. AURORA FIRES INSTALLATION AND USER MANUAL +61 (0) 266 868 408 PO 347 BOX BYRON BAY NSW 2481...
- Page 18 Please visit the Stove Bright website for a range of easy to follow video’s which will take you through the process of touching up your paint. http://forrestpaint.com/stove-bright/how-tos-with-stove-bright AURORA FIRES INSTALLATION AND USER MANUAL +61 (0) 266 868 408 PO 347 BOX BYRON BAY NSW 2481...
- Page 19 5. TESTING TESTING LABORATORY: Vipac Engineers & Scientists MANUFACTURER: Aurora Wood Fires Pty Ltd MODEL: The Aether TEST REPORT NUMBER: 30A-14-0097-TRP-359162-0 TEST DATES: 25 January 2015 to 30 January 2014 CONCLUSION: This appliance meets the requirements of AS/NZS 4013:2014 section 1.2.3 (f)
Need help?
Do you have a question about the THE AETHER and is the answer not in the manual?
Questions and answers