Download Print this page

Aurora THE HEARTH Installation And User Manual

Hide thumbs Also See for THE HEARTH:

Advertisement

Quick Links

THE HEARTH
INSTALLATION AND USER MANUAL
!
AURORA WOODFIRES INSTALLATION AND USER MANUAL
+61 266 874880 PO 347 BOX BYRON BAY
NSW 2481

Advertisement

loading

Summary of Contents for Aurora THE HEARTH

  • Page 1 THE HEARTH INSTALLATION AND USER MANUAL AURORA WOODFIRES INSTALLATION AND USER MANUAL +61 266 874880 PO 347 BOX BYRON BAY NSW 2481...
  • Page 2: Table Of Contents

    
 CONTENTS PLANNING DIMENSIONS & SPECIFICATIONS INSTALLATION USING THE HEARTH TESTING KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE AURORA WOODFIRES INSTALLATION AND USER MANUAL +61 266 874880 PO 347 BOX BYRON BAY NSW 2481...
  • Page 3: Planning

    1. PLANNING We would like to thank you for your purchase of The Hearth.The care and craftsmanship we put into each fire will give you trouble free heating for many years to come. For your safety, ensure you have read the operation guidelines prior to use. The Hearth should be installed by a qualified professional.
  • Page 4 IMPORTANT: Frames must also be considered. Timber window frames must be treated as combustible surfaces. Aluminium frames can be treated as non- combustible surfaces AURORA WOODFIRES INSTALLATION AND USER MANUAL +61 266 874880 PO 347 BOX BYRON BAY NSW 2481...
  • Page 5: Dimensions & Specifications

    • Finish: high temperature coating system. Resistant to 650 degrees MATTE BLACK A range of other colours are available on request. For more information visit our website: www.aurorawoodfires.com.au AURORA WOODFIRES INSTALLATION AND USER MANUAL +61 266 874880 PO 347 BOX BYRON BAY NSW 2481...
  • Page 6: Installation

    • 50mm minimum overlap of the stainless steel 6” flue into the connector • Engage smallest diameter of the triple skinned flue, minimum 50mm into the connector in the lower active flue. AURORA WOODFIRES INSTALLATION AND USER MANUAL +61 266 874880 PO 347 BOX BYRON BAY NSW 2481...
  • Page 7 3. INSTALLATION (CONTINUED) PITCHED ROOF INSTALLATION (Custom Made Bracket) AURORA WOODFIRES INSTALLATION AND USER MANUAL +61 266 874880 PO 347 BOX BYRON BAY NSW 2481...
  • Page 8 The minimum height of the flue system further than 5 meters from the highest point of the roof shall be 1 meter above roof penetration. AURORA WOODFIRES INSTALLATION AND USER MANUAL +61 266 874880 PO 347 BOX BYRON BAY NSW 2481...
  • Page 9 The minimum height of the flue system further than 5 meters from the highest point of the roof shall be 1 meter above roof penetration. AURORA WOODFIRES INSTALLATION AND USER MANUAL +61 266 874880 PO 347 BOX BYRON BAY NSW 2481...
  • Page 10 • CRIMPS (MALE ENDS) ON POINT UPWARDS STAINLESS STEEL PIPES TO POINT DOWN INTO THE HEATER • POP RIVET ALL JOINTS WITH 1/8 “ MONEL RIVETS AURORA WOODFIRES INSTALLATION AND USER MANUAL +61 266 874880 PO 347 BOX BYRON BAY NSW 2481...
  • Page 11 ON OUTER PIPES TO STAINLESS STEEL PIPES TO POINT UPWARDS POINT DOWN INTO THE HEATER • POP RIVET ALL JOINTS WITH 1/8 “ MONEL RIVETS AURORA WOODFIRES INSTALLATION AND USER MANUAL +61 266 874880 PO 347 BOX BYRON BAY NSW 2481...
  • Page 12 Position the single skin flue inside the suspension bracket and tighten the grub screws. Use a level to ensure that the flue is perfectly vertical and the grub screws are tight. Grub Screws AURORA WOODFIRES INSTALLATION AND USER MANUAL +61 266 874880 PO 347 BOX BYRON BAY NSW 2481...
  • Page 13 Ball Bearing Shaft Pivot Lower plate Stainless Thrust Bearing Ball Bearing Cap 16mm Nut NOTE: The bearings are shipped in the correct order on the shaft. AURORA WOODFIRES INSTALLATION AND USER MANUAL +61 266 874880 PO 347 BOX BYRON BAY NSW 2481...
  • Page 14 3. INSTALLATION (CONTINUED) Locking Plates AURORA WOODFIRES INSTALLATION AND USER MANUAL +61 266 874880 PO 347 BOX BYRON BAY NSW 2481...
  • Page 15 • If the combustible floor is installed on concrete, you can replace the combustible material with a non-combustible material laid directly onto the concrete. AURORA WOODFIRES INSTALLATION AND USER MANUAL +61 266 874880 PO 347 BOX BYRON BAY NSW 2481...
  • Page 16 Note: Non combustible finishes can be applied to the floor protector, e.g. tiles, stone, metal. Floor protector 30cm 30cm 650mm combustible Floor 500mm Non combustible AURORA WOODFIRES INSTALLATION AND USER MANUAL +61 266 874880 PO 347 BOX BYRON BAY NSW 2481...
  • Page 17: Using The Hearth

    • THE USE OF SOME TYPES OF PRESERVATIVE-TREATED WOOD AS A FUEL CAN BE HAZARDOUS. • DO NOT TOUCH THE FIREBOX OR FLUE WHEN HOT. AURORA WOODFIRES INSTALLATION AND USER MANUAL +61 266 874880 PO 347 BOX BYRON BAY NSW 2481...
  • Page 18 fireplace. Once this initial firing process is successfully completed, the coating will bond to the metal with a colourfast finish that will last for years AURORA WOODFIRES INSTALLATION AND USER MANUAL +61 266 874880 PO 347 BOX BYRON BAY NSW 2481...
  • Page 19 Ventilate and vacate the room to avoid discomfort. Once the burn is complete there will be no odour or smoke the next time the stove is fired. AURORA WOODFIRES INSTALLATION AND USER MANUAL +61 266 874880 PO 347 BOX BYRON BAY NSW 2481...
  • Page 20: Testing

    5. TESTING TESTING LABORATORY: Vipac Engineers & Scientists MANUFACTURER: Aurora Wood Fires Pty Ltd MODEL: The Hearth TEST REPORT NUMBER: 30A-14-0097-TRP-359162-0 TEST DATES: 25 January 2015 to 30 January 2014 CONCLUSION: This appliance meets the requirements of AS/NZS 4013:2014 section 1.2.3 (f)