Turning The Light On / Off - Shimano Steps BT-E6000 User Manual

„ Turning the light ON / OFF
• If your bicycle has the lights connected to drive unit, the lights can operate from the cycle computer or junction [A].
• The light turns off in conjunction with the battery power. When the battery power is off, the light is off.
SC-E6100
1.
Press the light button.
• Lights are turned on.
• To turning off the lights, push the button again.
* When the battery powered light is not connected and
[Backlight] is set to [MANUAL], pressing the light
button turns the cycle computer's backlight on and
off.
EW-EN100
You cannot turn the light off while riding the bicycle.
1.
Press and hold (about 2 seconds) the button until the
lights turn ON/OFF.
The LED lamp (inner side) blinks green.
When the light is
turned on
Button
29
Light button
When the light is
turned off
LED lamp
(inner side)