Specifications - Shimano Steps BT-E6000 User Manual

(C)
Cycle computer / Junction [A]
(D)
Assist switch
(E)
Drive unit
(F)
Battery (rear carrier mount type)
Battery mount (rear carrier mount
(G)
type)
*3 If the firmware version of the drive unit is 3.2.6 or lower, the battery may not operate properly. Update the firmware
version via E-TUBE PROJECT.

Specifications

Operating temperature
range: During discharge
Operating temperature
range: During charging
Storage temperature
Storage temperature
(Battery)
Charging voltage
Charging time
* The maximum speed for which power assistance is provided is set by the manufacturer and is conditional on where the
bicycle is to be used.
• SC-E6100
• EW-EN100
• SW-E6010
• DU-E6100
• DU-E6110
• BT-E6000
• BT-E6001
• BM-E6000
-10 – 50˚C
0 – 40˚C
-20 – 70˚C
-20 – 60˚C
100 – 240 V AC
Refer to the user's manual
for the battery. For the
latest information on
manuals, see the website
(http://si.shimano.com).
(H)
Battery (down-tube mount type)
Battery mount
(I)
(down-tube mount type)
(J)
Battery (Integrated type)
(K)
Battery mount (Integrated type)
*3
Battery charger
(L)
* 1: EC-E6002 + SM-BCC1
* 2: EC-E6000
Battery type
Nominal capacity
Rated voltage
Drive unit type
Motor type
Rated drive unit power
12
• BT-E6010
• BT-E8010
*3
• BT-E8014
• BM-E6010
• BM-E8010
• BT-E8020
• BM-E8020
Lithium ion battery
Refer to the user's manual
for the battery. For the
latest information on
manuals, see the website
(http://si.shimano.com).
36 V DC
Midship
Brush-less DC
250 W