Switch The Gear Shifting Mode - Shimano Steps BT-E6000 User Manual

Clearing the traveling distance
You can clear the traveling distance in the main screen. When the traveling distance is cleared, [TIME] (travelable time),
[AVG] (average speed), [MAX] (maximum speed) are also cleared.
1.
Press Assist-A to change the travel data display to [DST].
Assist
2.
Press and hold down Assist-A until the value below the
[DST] display blinks.
3.
Press Assist-A again.
• Travel data is cleared.
• The [DST] value stops blinking and the screen takes
resets to the basic screen after being left alone for 5
seconds.
„ Switch the gear shifting mode
This function is only for electronic gear shifting by internal geared hub.
1.
Press Shift-A at the basic screen.
Each press switches between [Manual] and [Auto].
Automatically shift gears according to
[Auto]
the pedal load.
Manually operate the gear-shift
[Manual]
mechanism for electronic gear shifting.
Shift
Automatic
35
< SC-E6100 >
Manual