Installing And Removing The Battery - Shimano Steps BT-E6000 User Manual

„ Installing and removing the battery
The battery is secured to the battery mount with the key.
The following description may not be applicable, as different types of keys are available.
Installing
CAUTION
• Hold the battery firmly and be careful to prevent dropping when installing.
• Pay attention to the following to prevent the battery from falling while riding the bicycle:
- Make sure the battery is locked securely on the battery mount.
- Do not ride the bicycle with the key inserted.
Before riding, make sure that the charging port cap is closed.
BT-E6000/BT-E6001
1.
Insert the battery in the battery mount rail from
behind.
• Slide the battery forward, and then push it in firmly.
2.
Remove the key.
• Return the key to the locked position and then
remove the key.
BT-E6010/BT-E8010/BT-E8014
1.
Insert the battery from bottom side.
• Align the indentation in the bottom of the battery
with the protrusion on the battery mount.
NOTE
19
Rail