Turning The Power On / Off - Shimano STEPS E8000 Series User Manual

„ Turning the power ON / OFF
Automatic power off function
If the bicycle has not moved for over 10 minutes, the power will automatically turn off.
Turning the power ON and OFF via the battery
BT-E8010/BT-E8020/BT-E6010
Press the power button on the battery. The LED lamps will
light up indicating remaining battery capacity.
• When turning on the power, check that the battery is firmly
attached to the holder.
• Power cannot be turned on while charging.
• Do not place your foot on the pedals when turning on.
A system error may result.
BT-E8010/BT-E8020 can be forced to power off by holding
down the power button for 6 seconds.
Turning the power ON and OFF via the cycle computer
SC-E6010
• Hold down the power button on the cycle computer for
2 seconds.
If internal battery of cycle computer isn't charged sufficiently,
the power will not turn on.
The internal battery will be charged if put on the bike after
turning on.
NOTE
NOTE
BT-E8010
Power button
BT-E8020
BT-E6010
Power button
19
Power button
Power button