Shimano Steps BT-E6000 User Manual page 50

„ RD protection reset
In order to protect the system from falls etc., if the bicycle is subjected to a strong impact, the "RD Protection function"
is enabled. The connection between the motor and the link will be momentarily severed so that the rear derailleur can
no longer operate.
Executing "RD Protection Reset" restores the connection between the motor and the link, as well as the function of the
rear derailleur.
1.
Enter the [RD protection reset] menu.
(1) Launch the setting menu.
(2) Press Assist-X or Assist-Y to select [RD protection
reset], then press Assist-A.
2.
Press Assist-X or Assist-Y to select [OK].
Assist
Configurable
items
[OK] Execute the "RD protection reset".
[Cancel] Cancel and return to setting menu.
3.
Press Assist- A.
Assist
4.
Rotate the crankarm.
Connection of motor and the link is restored.
„ Exit
Return to the main screen.
1.
Launch the setting menu.
2.
Press Assist-X or Assist-Y to select [Exit], then press Assist-A.
* The screen will automatically return to the setting menu screen.
Details
48