Lcd Item Descriptions - Honeywell E529 Product Manual

E529 Product Guide

LCD Item Descriptions

Figure 3. LCD Features
Rev 2.0 3/20/2017
1. Low Battery Indicator: Displays icon when AA Battery
voltage < 4 Volts
2. ecoMODE selected: Guest has pressed the green eco
button to place the room in ecoMODE
3. Room Entry Door Open: Appears when room entry
being monitored is open
4. Temperature Reading: Displays Set (target), Room
(measured), or (optionally, if networked to an exterior
sensor) Outside temperature. Press the DISPLAY
button to toggle between each
5. Temperature Scale: Displays temperature in Fahrenheit
(°F) or Celsius (°C)
6. Network Connection Status: The presence of this "dot"
indicates the room is online and connected to the
INNCOM server. NOTE: As of 6/2016 this feature
DOES NOT currently work if using a CBL32 Room
Gateway such as an E528.4G or PC502.4G. You will
NOT get a Dot on the E529 display. You must use the
E529 rUn2 WAN Test to check that the room is
connected to the network
7. HVAC Control Mode: AUTO displayed when HVAC
control is in AUTO Mode.
8. Fan Speed (LO, MED or HI): Displayed when FAN
button has been pressed to select a manual Fan
Speed.
9. Temperature Reading: Displays Set (target), Room
(measured), or (optionally, if networked to an exterior
sensor) Outside temperature
10. A "V" indicates the Value of a selected Parameter is
being displayed
11. A "P" indicates a Parameter# is being displayed
12. Room Balcony or Window Open: Appears when a
window or balcony door being monitored is open
5