Language; Region; Date & Time - Macherey-Nagel NANOCOLOR UV/VIS II Manual

Settings
6.1.1

Language

Click on the icon to select the language of the instrument from the list that pops up. After
you have selected the desired language, the list will close and the chosen language will be
applied as the general display language for the entire device.
6.1.2

Region

Click on the icon to select the region of the device from the list that pops up (Figure 61).
After you have selected the desired region, the list will close and the chosen region will be
applied. Changing the regional settings will affect the display of the measurement result. This
can change the way the thousands separator and the decimal place are depicted (Example:
DE (Germany) 1.567,222; UK (United Kingdom) 1,567.222).
6.1.3 Date & time
Click the icon to change the date and time display format. Four different options are
available for the date format (Figure 62). After changing the display format, the date will be
shown in the status bar in the chosen format. Two options are available for the clock display
– 12 hrs and 24 hrs. After changing the clock display format, the time will be shown in the
status bar in the chosen format. The setting will be saved upon exiting the menu.
NANOCOLOR
Figure 61: List box of regional settings
® UV
/ II and NANOCOLOR
VIS
®
VIS II V 1.1 / 10.2017
55