Maintenance; Emptying The Dust Cup; Cleaning The Filters - Shark ROCKET NV480 Series Instructions Manual

MAINTENANCE

To keep your vacuum's
suction power optimal, follow
these instructions. Make
sure unit is off and cord is
unplugged.
WARNING: To reduce
the risk of shock and
unintended operation,
turn power off and
unplug unit before
servicing.
Hand wash filters
with water only to
prevent damage from
cleaning chemicals.
Allow ALL filters
to dry completely
before replacing
in the vacuum to
prevent liquid from
being drawn into
electric parts.
IMPORTANT: DO NOT
use soap when cleaning
the HEPA filter.

EMPTYING THE DUST CUP

RECOMMENDED
1
Press the
FILTER CLEANING
Release
SCHEDULE:
dust cup off the vacuum.
Pre-Motor Filter Kit
(Foam & Felt)
XFF450
Clean every 3 months.
Post-Motor Filter
(HEPA)
XHF450
Clean once a year.
13
1-800-798-7398
STEP 1 STEP 2
Dust-Cup 2 Hold dust cup over a
button and lift
trash bin and press the
empty-release latch on the
bottom of the dust cup.
STEP 3
FOAM
FILTER
FELT
FILTER

CLEANING THE FILTERS

1 Pre-Motor
3 Press top dust-cup
(foam and felt):
release latch to access
With the dust cup
dust screen and remove
removed, take out and
built-up debris as required.
rinse the foam and felt
filters with water. Tap
loose dirt off filters
between washes
as needed.
HEPA
2 Post-Motor (HEPA):
To access the HEPA filter,
remove the floor nozzle
by pressing the Nozzle
Release button on the
side of the vacuum. To
release the filter frame,
turn latch to the unlock
symbol. Press tab on
filter to remove and
access filter. Rinse HEPA
filter with water only. Let
air-dry completely before
reinstalling.
14
s h a r kc l e a n . c o m