GENERAL WARNINGS • Only use Shark® branded filters and • Your Shark® vacuum may not be flammable dust) accessories. Failure to do so will also • Your vacuum cleaner may consist of designed to stand up on its own.
Page 3
ASSEMBLY USING YOUR VACUUM SETTINGS = Carpet Cleaning = Bare Floor = OFF Select surface setting: O Power Off I Bare Floor For bare floors and small area rugs. II Carpet For carpets. Plug power cord into outlet. Place foot on floor nozzle and tilt handle back.
Page 4
USING THE FLEXIBLE HOSE CLEANING THE FILTERS Regularly clean and replace your filters to keep your vacuum’s suction power optimal. IMPORTANT: DO NOT use soap when cleaning the filters. CLEAN PRE-MOTOR FILTERS EVERY 3 MONTHS Pre-Motor Pre-Motor Foam Filter With the dust cup removed, take out the Felt Filter foam and felt filters, and rinse with water.
Page 5
CHECKING FOR BLOCKAGES TROUBLESHOOTING Vacuum is not picking up dirt. No suction or light suction. NOTE: Remove dust cup, wand, and floor nozzle and check all dust cup intake openings. • Check filters to see if they need cleaning. Follow instructions for rinsing and drying the NOTE: Remove the handle assembly and check for blockages.
Page 6
REGISTER YOUR PURCHASE Benefits of registering your product and FIVE (5) YEAR LIMITED WARRANTY creating an account: registeryourshark.com • Get easier, faster product support and The Five (5) Year Limited Warranty applies to purchases made from authorized retailers of SharkNinja access to warranty information Scan QR code using Operating LLC.
Need help?
Do you have a question about the Navigator NV40 Series and is the answer not in the manual?
Questions and answers