Factory Restore - Netum NT-W6 Quick Setup Manual

Factory Restore (5 steps included)
Configures the scanner to revert all settings to factory defaults.
Step 1 Factory Restore
Step 2 Serial Port
Step 3 Baud Rate
Step 4 Enter Key
Step 5 Setting Channel
1)
Scan channel 1, the scanner will have di di di di... sound.
2)
Take out the receiver and plug it again, then the di di sound will be stopped then
you can start to scan the barcodes
000B0
RS232 Serial Port
19200 bps
Enter
Channel 1