Installing And Connecting The Refrigerator - Dometic CRD0050 Installation Manual

Installing and connecting the refrigerator

7 Installing and connecting the
refrigerator
A
NOTICE! Safety instructions for installation on boats
Please note the following instructions for installation on boats:
• The device can be tilted sideways up to 30°. When setting up the
refrigerator, note that it must be fastened to take account of this. If
you have any questions regarding installation, consult your specialist
dealer.
• Install the refrigerator so that the warm air produced can easily flow
away (either upwards or to the sides, fig. 3, page 4).
• The appliance is designed for ambient temperatures between
+16 °C and +38 °C.
• If the appliance is powered by the mains, ensure that the power
supply has a residual current circuit breaker.
7.1 Installing the refrigerator
A
NOTICE!
• Fasten the device as described in the operating manual to prevent
hazards.
• Keep objects clear of openings in the housing or mounting structure
(such as ventilation slots).
• The refrigerator is only suitable for installation in a fitted niche. Once
it is installed, only the front of the appliance may be accessible.
• If brakes are applied fully, then strong forces act in the direction of
travel. In order to prevent damage to the cooling appliance and the
vehicle interior, the cooling appliance should not be installed with
the front facing the direction of travel.
The appliance is designed for ambient temperatures between +16 °C and +38 °C.
In continuous operation, the air humidity may not exceed 90 %.
Set up the fridge in a dry, sheltered place. Avoid placing it near heat sources such as
radiators, gas ovens, hot water pipes etc.
14
CRD0050
EN