Konica Minolta Q-mini K-QM-3501E Operating Instructions Manual page 24

Playback
4
3
No.
1
OFF/ON
1 Turn the power on.
• The switch will return to its original position.
2 Set the REC/PLAY switch to "PLAY".
• The REC/PLAY lamp lights up in green, and
the last recorded image is displayed.
3 Press the + or - Button.
+ : Each time this is pressed, the next image in
the forward direction (recorded order) is
displayed.
2
REC
PLAY
- : Each time this is pressed, the next image in
the reverse direction (reverse recorded
order) is displayed.
• Keeping the buttons pressed will change the
images continuously.
• Pressing the + or - Buttons changes the
playback image number as shown in 察 in the
above figure.
• Rapidly pressing the + or - Button repeatedly
will change only the playback image number,
sending you directly to the display of the
desired image number.
• If no operations are performed for about two
minutes with the power on when using batteries,
the power save function automatically turns the
power off.
(Auto Power Off) You must turn the power on
again when you want to operate the camera.