• Make sure to close the cover after ejecting or
inserting the card.
• If the card is ejected when the power is on, the
power will be automatically shut off.
• If the card is not inserted when the power is
turned on,
will light up on the LCD
screen. Also, if the inserted card cannot be
used,
will blink.
• When the card does not eject after pressing the
Eject Button, push the card fully into the slot
again and then press the Eject Button firmly.
• Pushing the Eject Button when the card slot is
facing downwards can cause the card to fly out.
Therefore, be careful that the card does not fall
out when ejecting.