Konica Minolta Q-mini K-QM-3501E Operating Instructions Manual page 17

察 拶
• The year is set to 2000 at shipping, and so
please use the + or - Buttons to set the correct
year.
• Keeping the + or - Button pressed will keep
the numbers changing continuously.
• When setting the day, each month is displayed
up to the 31st. This is not a malfunction. After
setting, the day is automatically corrected. (For
example, a setting at February 31 becomes
March 1)
• The date and time cannot be set when the
REC/PLAY switch is at PLAY.
• Even if the date/time is not displayed when the
撮
image
automatically stored during recording so that
the date/time can be displayed during playback.
• If the date/time is not set or was erased after
being
"2000.01.01" (and the time as 12:00) during
recording. This will be recorded for the image.
To correct the date/time after setting
1. Press the DATE Button down for two seconds
or more.
The year setting flashes.
2. Press the DATE Button until the desired setting
item flashes.
3. Finally, set the correct minute setting and press
the DATE Button.
is recorded, the
set, the LCD screen
date/time is
will flash