Table of Contents
Advertisement
8
Diagnostic Functions
8.2
ASCII Dump Mode
ASCII Dump Mode offers the option of checking incoming control sequences at an interface. The commands are printed out
as text. In addition, a corresponding error message is printed out immediately after an error occurs.
The printout occurs using the heat level and print speed specified in the Setup > Printing menu.
i
Notice!
The printout occurs without taking the label gaps into consideration. This is why endless media are most
suitable for this purpose.
i
Notice!
In case of questions about programming, keep a printout of your label file which was created in ASCII Dump Mode
handy. The printout can be transmitted clearly via fax.
Insert printable medium (labels, endless paper) which extends across the entire printing width.
If the printout is to occur using thermal transfer printing, insert transfer ribbon with the maximum width.
Start menu.
Select Diagnostics > ASCII Dump Mode.
Send print jobs.
Select
Example:
Example label printed normally (left) and in ASCII dump mode (right)
Figure 19
The control characters (ASCII-Code 00...31) are presented in stylized design.
e.g. :
L
: Code 10 (0A) - line feed
F
C
: Code 13 (0D) - carriage return
R
40
to cancel the printout or switch to the Ready mode.
ASCII Dump Mode
Tue Feb 13 13:48:03 2018
Brady i5100-300
Firmware V5.14 (Feb 09, 2018) - #164162032326
i5100 Configuration Manual
Hide quick links:
Advertisement
Table of Contents
