Display; Interpreter; Zpl - Brady BradyPrinter i5100 Setting Configurations And Connectivity Manual

6 Configuration
6.1.11

Display

 Start menu.
 Select Setup > Display.
Parameter
Brightness
Time powersave
Parameters of the Setup > Display menu
Table 18
6.1.12

Interpreter

 Start menu.
 Select Setup > Interpreter.
Parameter
Character set
USB
RS-232
FTP
LPD
RawIP
Bluetooth
Table 19 Parameters of the Setup > Interpreter menu
6.1.13

ZPL

 Start menu.
 Select Setup > ZPL.
Parameter
> Printing width
> Label length
Table 20 Parameters of the Setup > ZPL menu
26
Meaning
Brightness of the LCD display.
Time between the last operation and activation of energy-saving mode.
Meaning
Selection of the character set table for adaptation to the computer
system used. Switching the character set via software is not possible.
Characters not available in the selected character set can be accessed
using the Unicode table.
Choosing between the programming languages JScript and ZPL for data
transfer via USB interface
Choosing between the programming languages JScript and ZPL for data
transfer via RS-232 interface
Choosing between the programming languages JScript and ZPL for data
transfer via FTP
Choosing between the programming languages JScript and ZPL for
printing with LPD
Choosing between the programming languages JScript and ZPL for
printing with RawIP
Choosing between the programming languages JScript and ZPL for
data transfer via Bluetooth
 only with Bluetooth adapter installed
Meaning
Setting the print width for ZPL programming
Setting the label length for ZPL programming
Default
8
5 min
Default
UTF-8
JScript
JScript
JScript
JScript
JScript
JScript
Default
100.0 mm
150.0 mm
i5100 Configuration Manual