13 Voice Commands; Add Contacts; Remove Contacts; Start Voice Commands - Kyocera Neo User Manual

13 Voice Commands

Voice commands allow you to call a contact, dial
a phone number, access menus, or find contact
information from your voice dial list.
Note: You cannot use voice recognition to end
a call; you must press the
is open.

Add Contacts

To call or find a contact using voice dial you
must add the contact to your voice dial list. The
contact name must not have more than three
words or components in a contact name for
voice dialing recognition.
To add a contact to your voice dial list:
Select >
1. Menu Contacts
At the contact list, highlight a contact
2.
and press the
OK
appears next to a name when voice dialing
is active. Check each name you wish use
with voice dialing.
Select .
3. Save
User Guide
key when the flip
End
>
Voice Dial List
key. A check mark

Remove Contacts

To remove a contact from your voice dial list:
Select
1. Menu
At the contact list, highlight a check marked
2.
contact and press the
mark appears next to a name when voice
dialing is inactive. Uncheck each name you
wish remove from voice dialing.
Select
3. Save

Start Voice Commands

From the home screen, press and hold the
1.
key to initiate voice commands. The
Send
phone prompts, "Say a command".
.
Say one of the following commands and
2.
following the voice prompts.
"
– Contact <name>
contact on your voice dial list.
"
– Dial Number <number>
speaking the digits of the phone number.
"
– <shortcut name>
menu item.
"
– Find Contact
contact from your voice dial list.
> >
Contacts Voice Dial List
key. No check
OK
.
" sends call to a
" sends call by
" sends you to a
" allows you to find a
.
75