Purge Valve Installation - Agilent Technologies X3500-64000 User Manual

Available languages

Technical Information

Purge Valve Installation

A gas purge valve is available to protect the pump bearings against

particulate and corrosive gases that could move into the pump. To

install the gas purge valve it is necessary to unscrew the purge port

cover as shown in the following figure,

and then screw the gas purge valve (with a torque of 2.5 Nm) as

shown in the following figure.

TwisTorr 304 FS User Manual / 87-901-027-01

Show Quick Links