Soft Start - Agilent Technologies X3500-64000 User Manual

Available languages

Technical Information

Soft Start

"Soft Start" mode is provided to start the pump after a protracted

stop of the TwisTorr 304 FS. This allows a better grease distribution

in the bearings.

The "Soft Start" mode is disabled by default.

To enable the "Soft Start" mode it must be activated by the suitable

software or Remote I/O command (see Controller Manual).

"Soft Start" frequency steps are as follow: 300 Hz, 400 Hz, 800 Hz, 900

Hz. For more details see Controller Manual.

TwisTorr 304 FS User Manual / 87-901-027-01

Show Quick Links