Operating Modes - Sight mark SIGNAL N320RT User Manual

USB CONNECTION continued
USB Mass Storage Device
When the Signal is selected as a USB mass storage device and the USB cable is disconnected from the PC, the unit will
remain turned off. The Signal must be powered on to continue operation.
When the Signal is in power mode and the USB cable is disconnected from the PC, the unit will turn off. The unit must be
turned back on in order to be detected by the PC.

OPERATING MODES

The Signal RT is equipped with 3 operation modes: video, photo, and review. Video mode allows for video recording of
what is seen on the display. Video mode is the default mode and will be active each time the unit is turned on. When the
Signal is in video mode, the (camcorder) icon is shown on the display. If sound recording is activated, the
icon is also shown on the display. Photo mode allows for image capture of what is seen on the display. When the Signal
is in photo mode, the (camera) icon is shown on the display. Review mode allows the user to see previously recorded
videos or pictures. When in Review mode the
or the (video) icon will be shown if a video is being display.
In order to switch between modes:
1. Press and hold the record button (5) to cycle between modes.
2. Switch between modes by a long press of the record button.
3. The modes will cycle between Video, Photo, and Review.
10
(picture) icon will be shown on the display if a photo is being displayed
Video Mode
Video mode is the default mode each time the Signal is turned on. The
notify the user it is in video mode and will record video. If sound recording is activated the
the display. Users can still enter and navigate menu during recording. You can only stop recording after exiting the menu.
Display icons are not recorded.
To start recording:
1. Briefly press the record button (5).
2. The Signal will start recording. "REC" will be displayed at the top left corner of the display. The record timer will also
start.
3. To stop recording, press the record button again. The record timer will stop.
(mic)
Note: the maximum duration of a recorded file is seven minutes. After this time, a video is recorded in a new file. The number of
recorded files is limited by the capacity of the unit's internal memory. Approximately 5 hours of video only can be saved on the
internal memory.
(camcorder) icon is shown on the display to
Record timer ZOOM SOUND
9x
Video
REC
00:42
recording
00:02
Elapsed
recording
time
(mic) icon is also shown on
11