Table of Contents
Advertisement
Rebooting. A RocketNVME RAID Controller entry should be
4)
displayed under Storage Controllers:
3.
Installing the HighPoint NVMe Manager software
The HighPoint NVMe Manager is used to configure and monitor the
SSD7101A-1. Download the HighPoint NVMe Manager Software package
from the HighPoint website:
http://highpoint-tech.com/USA_new/series-rs6661a-nvme-download.htm
1)
Extract the package and double-click the setup.exe program to install
the software.
2)
The HighPoint NVMe RAID Manager will configure the SSD7101A-1
NVMe drive automatically after installation is complete.
3)
Open Windows Disk Management and check to make sure the SSD
drive is configured.
4)
Create and format the partition using Disk Management to start using
the SSD7101A-1 drive.
11
Advertisement
Table of Contents
