MyVCC - MyDisplay
Edit profile
You can only configure the display and access rights from the administrator profile
("MyDisplayProfile"). This profile is set by default on the appliance and cannot be deleted.
All other profiles can be deleted.
Press the Edit profile button to edit the profile.
You now have the possibility to make the following settings:
Press the Name profile button. You can now change the profile name.
Press the Set password button and then enter a password to protect your
profile.
Press the Order of priority button and set the order of priority from 1 to 5 for this
profile using the central dial.
The order of priority determines the hierarchical position of the profile in
comparison to other profiles on your appliance.
5 has the highest priority and 1 the lowest priority. This means that profiles
ranked from 1 to 4 are all subordinate to the profile ranked with 5.
As a result, you will not be prompted to enter the password despite a password
protection if you want to change from a higher-ranking profile (e.g. rank 5) to a
lower-ranked profile (e.g. rank 3).
However if you want to change from a lower-ranked profile into a high-ranked
profile, you must always enter the password if the password protection is
enabled.
Press the Delete profile button. The selected profile can now be deleted.
V-12 - 02/2018 - PM/Stme - English - © RATIONAL
119 / 153