Table of Contents
Advertisement
Domestic appliances
The following inspection tasks may be carried out by experienced technical personnel. Only
use genuine spare parts from the unit manufacturer.
Replacing the cover
seal model 112
The cover seal is pressed
into a guide on the cover
edge.
- Pull the old seal out of
the sealing groove. (no
tools are required for
this.)
- Clean the sealing groove.
- Moisten the seal base
with soapy water.
- Insert the new seal into
the sealing groove,
starting at each corner of
the cover. The seal base
must be inserted fully into
the seating frame.
146 / 153
Replacing the
pan valve seal
The annular pan valve
seal is attached to the
valve cover.
- Open the pan valve and
unscrew the valve cover.
- Clean the sealing groove.
- Pull the old sealing ring
out of the valve cover.
- Attach the new sealing
ring.
- Screw on the valve
cover.
V-12 - 02/2018 - PM/Stme - English - © RATIONAL
Advertisement
Table of Contents
