Table of Contents
Advertisement
MySCC - System Management
A USB stick with a software version later than the one installed on the appliance requests
an update.
Software update
step
1a
1b
2
3
4
5
6
110 / 153
info/button
V-12 - 02/2018 - PM/Stme - English - © RATIONAL
instructions
Model 112, 211, 311: Insert the USB stick into
the port beneath the control panel.
Model 112T/112L: Insert the USB stick into the
port on the front side of the control console.
Press the MyVCC button.
On the top left of the display, a USB stick with
the software on the USB stick will be displayed.
Press the System management button and
scroll down to the Software Update button.
Press the Software update button to start the
software update. Follow the instructions that
appear on screen and do not disconnect the
unit from the power supply.
A green tick on the top left of the display
will confirm that the software update was
successful.
Advertisement
Table of Contents
