Nice TTP Instructions And Warnings For Use page 4

3.2) Keypad
The appearance of the keypad of the TTP programmer is as shown in Figure 3. The keypad symbols and their meaning are described in
Table 2.
3
Table 2 Key
ON/OFF
OPEN
STOP
CLOSE
OK
ANTICLOCKWISE
CANCEL DIRECTION
CLOCKWISE
TORQUE REDUCTION
POSITION "0"
POSITION "1"
INTERMEDIATE POSITION Memorises intermediate position "I".
POSITION 0 AND 1
AUTOMATIC SEARCH
WIND THRESHOLD
SUN THRESHOLD
RAIN DIRECTION
SENSORS ON/OFF
CANCEL PARAMETERS
MEMORIZE
RADIO CONTROLS
CANCEL RADIO
CONTROLS
4
Description
This key is for switching the TTP on and off, and searching for the connected motor.
Sends the 'Open' command ('Up' for awnings).
This key is the equivalent of the 'Open' key on the remote control.
Sends the 'Stop' command.
This key is the equivalent of the 'Stop' key on the remote control.
Sends the 'Close' command ('Down' for awnings).
This key is the equivalent of the 'Close' key on the remote control.
This key is for confirming all programming operations; the three LEDs associated with this
key indicate the status of the operations in progress or of the communication between TTP
and motor.
Programmes anticlockwise motor rotation.
Cancels the settings for the direction of motor rotation.
Programmes clockwise motor rotation.
Enables/disables the torque reduction (RDC) function.
Memorises position "0".
Memorises position "1".
Starts the automatic search procedure for positions "0" and "1".
Displays and modifies the intervention threshold of the wind protection. Pressing the key repeatedly,
enables you to move cyclically through all the thresholds permitted by the connected motor
Displays and modifies the intervention threshold of the sun protection. Pressing the key repeatedly,
enables you to move cyclically through all the thresholds permitted by the connected motor
Displays and changes the direction of movement if the rain sensor is triggered.
Enables/disables intervention of the automated sun and rain systems
Cancels the parameters of the motor and restores the factory settings.
Memorizes a radio control in the motor memory.
Cancels a radio control from the motor.