Reset The Extender - Tenda AV1000 User Manual

Configure the Extender

Reset the extender

1. Log in to the extender's User Interface, and click Administration.
2. Move to Device Management part, and click Reset.
3. Click OK on the pop-up window.
Notes
1. During the restoration, do not unplug the extender.
2. Strongly recommend you not to reset the extender, unless the following sequence appears:
 You have to access the extender but you forget the login password.
 Your extender does not work well, and you want to reconfigure it.
 You cannot access the Internet, and Tenda technical support recommends you to restore it to
factory default.
19