Powerline - Tenda AV1000 User Manual

2. Move to Wireless Parameters part, you can change the mode, channel and channel width here.
Mode
11b/g/n mixed Allows 802.11b, 802.11g, and 802.11n devices to join the network.
11b/g Allows 802.11b and 802.11g devices to join the network.
11b Allows 802.11b devices to join the network.
11g Allows 802.11g devices to join the network.
Channel: Do not change the channel unless you experience interference (shown by lost wireless
connection or slow data transfers). If this happens, experiment with different channels to see which
the best is. The recommended channel spacing between adjacent access points is four channels (for
example, use channel 1 and 5, or 6 and 10).
Channel Width (Only available in 11b/g/n mixed mode):
Select any of these channel bandwidths to accommodate higher transmission speeds:
 40MHz: Select this bandwidth to maximize the wireless throughput.
 20MHz: Select this bandwidth if you encounter some issues with your wireless connection.
 Auto: Select this bandwidth if you want it to change the channel bandwidth automatically
according to needs.
3. Click OK to apply your settings after configuration.

3 Powerline

This section allows you to configure the powerline network settings.
13
Compatibility
Configure the Extender
Wireless Speed
Up to 300Mbps
Up to 54Mbps
Up to 11Mbps
Up to 54Mbps