Reboot The Extender - Tenda AV1000 User Manual

Configure the Extender
Tips
1. The extender is still working when the LED indicators are off. Don't forget to turn LED
indicators on if you need observe them. To turn on the LED indicators, just click the Enable here.

Reboot the extender

Rebooting the extender will activate any modified settings on the extender. When the parameters
you set cannot take effect or the extender cannot be used normally, please try rebooting your
extender to solve these problems. Note that when the extender is rebooting, do not unplug it.
1. Log in to the extender's User Interface, and click Administration.
2. Move to Device Management part, and click Reboot.
3. Click OK on the pop-up window.
18