Draytek Vigor2133 User Manual page 551

Parameter
–h
-v
-p <0/1>
E x a m p l
E x a m p
> ip6 ntp -p 1
% Set NTP Priority: IPv6 First
T e l n e t C o m m
T e l n e t C o m m
This command allows you to set IPv6 settings for LAN interface.
S y n t a x
S y n t a x
ip6 lan -l n [-<l:w:d:D:m:o:s> <parameter> | ... ]
S y n t a x
S y n t a x
Parameter
–h
-l n
-w n
-d <server>
-D <server>
-m n
-o n
-e n
Vigor2133 Series User's Guide
Description
It is used to display the usage of such command.
It is used to show the NTP state.
It is used to specify NTP server for IPv6.
0 – Auto
1 – First Query IPv6 NTP Server.
e
l e
a n d : i p 6 l a n
a n d : i p 6 l a n
D e s c r i p t i o n
D e s c r i p t i o n
Description
It is used to display the usage of such command.
It means to selete LAN interface to be set.
n= 1: LAN1
n= 2: LAN2, ... x: LANx. Default is LAN1
It means to selete WAN interface to be primary interface.
n= 0: None,
n=1: WAN1 ,
n=2: WAN2, ... x: WANx.
It means to set 1st DNS Server IP.
<server>= IPv6 Address
It means to set 2nd DNS Server IP.
<server>= IPv6 Address
It means to set ipv6 LAN management.
n=0:OFF
n=1:SLAAC. Default is SLAAC
n=2:DHCPv6
It means to enable Other option(O-bit) flag. (O-bit is redundant
when management is DHCPv6)
n=0: Disable
n=1: Enable.
It means to add an extension WAN.
n: 1: WAN1, 2: WAN2, ... x: WANx.
539